-
For Underwater or Dry Repair Use
-
Above Ground and In-ground Pools
-
Suitable for most types of Liners
-
Including Light Weight Vinyl, Heavy Gauge Vinyl
-
Also repairs Inflatable beds and toys
-
Fast Drying (bonds within 24 hours)
-
Choice of Two Vinyl Repair Kit Sizes to choose from
-
1FL OZ 3 5/8th inch x 12 inch Clear Vinyl Patch to cut from
-
2FL OZ 5 7/8th inch x 23 inch Clear Vinyl Patch to cut from
Vinyl Liner Clear Repair Patches should always be cut larger than the damaged area with round corners as this helps them stick better to the damaged area..
All surfaces to be repaired must be clean before you start. For inflatables and light gauge vinyl's, apply adhesive to patch sparingly and press tightly to surface to be repaired, allow to dry for 24 hours.
A face mask or goggles should be worn when going underwater to make vinyl repairs. For deep underwater repairs apply adhesive to patch and fold patch over upon itself. When you reached the damaged area underwater unfold patch and apply immediately to liner, squeezing out all water bubbles. Do not disturb patch for at least 24 hours.
For quick and easy vinyl repairs without liquid adhesive, use our Vinyl PLastic Pool Patches. This is a clear tape where you peel off the paper backing and apply immediately. Vinyl Plastic Pool Patches are excellent for other application repairs such as vinyl upholstery and waterbeds.
We have two sizes of Vinyl Liner Adhesive Repair Patch Kits available, please select your size from the drop down menu below ;
-
1FL OZ Kit contains Adhesive, 3 5/8th inch x 12 inch Clear Vinyl Patch to cut from
-
2FL OZ Kit contains Adhesive, 5 7/8th inch x 23 inch Clear Vinyl Patch and Applicator
Any questions Tel 0845 680 0854 or E mail sales@funfantastic.com
