-
Slidelock tubes extend from 4.88m to 6.40m
-
Polished stainless steel end stands
-
Anodised aluminium tubes
-
Plastic end bosses & steering wheels
-
Tube sections slide & lock together
-
Straps connect to tubes using unique slide & lock fixings
-
Locking device holds tube in position, stopping the cover from unwinding
-
Range of end stands available (see below)
Manufactured by Plastica in their own factory in St Leonards-on-Sea to be one of the best domestic swimming pool reels on the market, this Slidelock Telescopic Reel System will suit most domestic in-ground pools from 4.88m to 6.4m (16ft to 21ft) wide.
The Reel System is manufactured from anodised aluminium tubing, mirror polished stainless steel end stands, plastic bearings and steering wheels with stainless steel axle crank handles, which helps ensure that the system is extremely smooth in operation and last a long time when looked after.
Plastica's Slidelock Telescopic Reel System is extremely versatile and can be easily adapted to be electrically operated with an optional remote controlled power pack, the system is supplied complete with fittings to allow the fixture of either a new or existing cover to its adjustable reel.
The Plastica Slidelock Telescopic Reel System has telescopic tube sections which slide and lock together, this makes it easier and simpler to install and gives the system a greater rigidity. There is also a steering wheel at both ends of the reel which also helps make recovery of your larger covers easier, as two people can operate the system together.
With a range of five different end stands to choose from, simply select which end stands you require from the drop down menus below, along with any other accessories you may want, your order will automatically be updated to your exact specification as you proceed through checkout.
This comprehensive Reel System can be ordered with the following end stands at no extra cost ;
-
(A) Standard - End Stands are free standing and sit on your pools surround
-
(B) Wall Mounted - End Stands fix directly to the face of an existing wall
-
(C) Base Plate Mounted - End Stands bolt directly into your pools surround
-
(D) Sleeve Mounted - End Stands slide into a sleeve drilled into your pools surround
-
(E) Side Wall Mounted - End Stands fix directly to the Face of a side wall
Option (A) is also available with the option of 6 Caster Wheels so that you can easily move the reel system, or with a pair of Deck Anchors to secure the end stands to the ground to ensure that the reel system stays fixed in place when rolling and unrolling your pools cover.
Please note Plastica Slidelock Telescopic Reel Systems,
-
Should be set up to have a maximum 300mm overlap each side.
-
The maximum recommended area of material on the reel is 75sq.m2
-
Some flexing of the tube may occur with larger covers.
-
If you need a shorter reel system, then click here to buy the small version.
Please contact us if you have any other In-ground Pool Reel specification requests, either by calling 0845 680 0854 or E mail us sales@funfantastic.com
