Endurance Swimming Pool Filtration Pump and Tank Packs
-
Suitable for small and medium sized swimming pools
-
All Pumps Supplied with 1.5inch fittings
-
20 inch (500mm) 24 inch (600mm) Tank with 1.5 inch fittings
-
30inch (750mm) Tanks supplied with 2 inch fittings
-
Self priming pump grade 316 shaft
-
Suitable for salt water pools
-
6 Way Valve and Pressure Gauge Included
-
Laminated fibreglass tank
-
Reinforced with polyester resin
-
300mm Filter Tank Lid for easier media change
Amount of Media Required (not supplied)
|
Model
|
Tank Size
|
Media Required
|
|
|
|
|
|
EFI050
|
20 inch
|
3 Bags
|
|
EFI060
|
24 inch
|
6 Bags
|
|
EFI075
|
30 inch
|
11 Bags
|
-
20 inch (500mm) tank is suitable for most in-ground pools up to 30ft x 15ft in size
-
24 inch (600mm) tank is suitable for most in-ground pools from 30ft x 15ft to 38ft by 18ft
-
30 inch (750mm) tank is suitable for larger in-ground pools around 40ft x 20ft
Endurance swimming pool pumps have a grade 316 stainless steel shaft, so they are also suitable for use on Salt Water Pools, their perfectly balanced Noryl impeller and highly resistant shaft seal guarantees long-lasting performance.
The Endurance pumps are all self-priming with a suction lift of over 2m and are all IP-55 protected. Each prepared to withstand hot atmospheres and high humidity levels.
Endurance pumps feature a large 2 litre pre-filter basket to prevent foreign bodies entering and damaging the pump's impeller. These pumps have a clear view strainer cover and easily removed drain plugs provide simple maintenance operations
Pump Flowrates and capacities ;
-
0.75hp 0.56kW Endurance water flow rate 11,800 Litres an hour
-
1.00hp 0.75kW Endurance water flow rate 17,000 Litres an hour
-
1.50hp 1.12kW Endurance water flow rate 22,000 Litres an hour
Built to last Reinforced polyester resin and fibreglass laminated filter tank. Designed to outlast your swimming pool. Suitable for all domestic pools, corrosion resistant, even on salt water pools. Endurance filters feature a smooth outer shell to endure the harshest of weather.
Unique filter lid design Clear filter-lid allows visual inspection. Large diameter lid for simple access and maintenance. Filter lid incorporates integral pressure gauge and air-bleed valve. Quick-fit filter clamp allows easy access without special tools.
Just add filter media Supplied with pre-plumbed side-mounted multi-port valve with backwash sight-glass, internal air purge, water drain plug and weather resistant foot-plate base.
20 inch (500mm) / 24 inch(600mm) filters are supplied with 1.5 inch imperial fittings. 30 inch (750mm) filter is supplied with 2 inch fittings.
All components are injection moulded for superior strength. Corrosion proof collector and diffuser for superior filtration.
Remember If using AFM you only need 90% AFM to 100% Silica
Any Questions Tel 0845 680 0854 or E mail sales@funfantastic.com
Don't forget to select your required pump pack size v v below v v
