-
Robust, durable construction
-
Fully Equipped
-
Easy Installation with plug and play
-
Incoloy 825 heating element
-
Stainless Steel flow tube
-
Ultra-reliable flow switch allows safe operation as low as 1m3/hour
-
May be floor or vertically wall mounted
-
Control thermostat 0-40oC (1oC differential)
-
Safety thermal cut our 60oC (manual reset)
-
Supplied with hose tails
(Not suitable for salt water pools)
Construction
The Elecro EVO pool heater is manufactured from top quality components and material at the Elecro works in Hertfordshire, England.
Construction consists of a flow tube which is fitted with inlet and outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch (allowing water input from wither direction) with a gold tipped reed switch and Titanium fulcrum pin. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.
The heater is supported on two swivel feet; these can be rotated to permit either wall or floor mounting. The heater control components are positioned on the front face of the electrical enclosure.
Operation
The desired pool temperature can be easily selected on the plug and play heater using the panel-mounted thermostat dial. Safety and equipment protection is provided by the highly reliable flow switch. Over-temperature protection is provided by the thermal cut out (manual reset).
Any questions please E mail sales@funfantastic.com or call 0845 680 0854.
