Elecro EVO 230v Electric Swimming Pool Heater Titanium Element Single Phase

Elecro EVO Electric Swimming Pool Water Heater 230v Titanium Heating Element
Our Price: £365.00



Elecro 230v Single Phase Swimming Pool Electric Heater

Elecro EVO Electric Pool Heaters are suitable for in-ground, above ground, splasher type and wooden liner swimming pools. These Elecro EVo Electric Pool Heaters have titanium heating elements, this means they can also be used to heat salt water swimming pools.
  • Elecro 230v for domestic home use
  • 3kW to 6kW Heaters Minimum pump flow rate required 1m3 (1,000 Ltrs) an hour, max 17m3 (17,000 Ltrs) an hour.
  • 9kW to 24kW Heaters Minimum pump flow rate required 4m3 (4,000 Ltrs) an hour, max 17m3 (17,000 Ltrs) an hour.
  • Robust, durable construction
  • Fully Equipped
  • Easy Installation
  • Titanium heating elements
  • 316 Stainless Steel flow tube
  • Ultra-reliable flow switch allows safe operation as low as 1m3/hour
  • May be floor or vertically wall mounted
  • Control thermostat 0-40o/c (1o/c differential)
  • Safety thermal cut our 60o/c (manual reset)
  • 1½ inch BSP female threaded water connections
  • 2 year warranty / 3 years if fitted by a professional pool engineer
Construction

The Elecro EVO pool heater is manufactured from top quality components and material at the Elecro works in Hertfordshire, England.

Construction consists of a flow tube which is fitted with inlet and outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch (allowing water input from wither direction) with a gold tipped reed switch and Titanium fulcrum pin. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.

The heater is supported on two swivel feet; these can be rotated to permit either wall or floor mounting. The heater control components are positioned on the front face of the electrical enclosure.

Operation

The desired pool temperature can be easily selected on the Elecro EVO heater using the panel-mounted thermostat dial. Single phase power is supplied through a top quality Schneider contactor. Safety and equipment protection is provided by the highly reliable flow switch. Over-temperature protection is provided by the thermal cut out (manual reset). Elecro EVO single phase pool heaters run on 230 volts as found in most domestic homes here in Europe.

Any questions please E mail sales@funfantastic.com or call 0845 680 0854.

size