Home > Pool Categories > Above Ground Pools > Above Ground Pool Accessories > Filtration Pumps & Heaters

Bestway Flowclear 1000 Silica Sand Filter Pump

Our Price: £124.95
Currently Unavailable - Please email for availability: sales@funfantastic.com

Bestway Service Part No. BW58257

Genuine Bestway Silica Sand Filter Pump
(available to order with or without Silica Sand)


Compact Size Approx. 75cm high x 50cm long, 40cm wide

Bestway Flowclear Silica Sand Filtration Pump has a powerful water flow rate of 1000 US Gallons an hour (3,785 Litres). The 1000 Flowclear Sand Pump brings the In-ground Swimming Pool Experience to the Above Ground Market at a fraction of the price, the silica sand should last between three to five years before needing replacement. If you are looking to upgrade your pump and your Pool has the standard 1.25 inch inlet and return fittings that you just push a hose on to, then this fantastic Silica Sand pump is a must for you.

The Flowclear Sand Filter is extremely easy to set up and use, it is ideally suited to work extremely well with other Bestway accessories such as the Bestway 2.8kw pool heater and the Bestway vacuum maintenance kit for example.

This Flowclear Sand Filter will give you a higher quality pool circulation, resulting in cleaner water, when the filters pressure rises, instead of cleaning or replacing a filter, you just backwash the pump to waste by turning the 6 position flange valve to backwash to get rid of all the debris that the sand has trapped, after you have washed and rinsed the debris away you can start to circulate the filtration system straight away again using filtration mode.

This filter pump uses a 25kg bag of Silica Sand to filter debris out of your pool, the Silica Sand usually lasts around 3 years to 5 years before it needs to be replaced, so it is also a much more economically sound propostition as you will not need to buy any more cartridge filters.

Most Bestway Intex style above ground Pools with a water volume of up to 20,000 Litres can use this pump, it is supplied with two 2m x 1.25 inch flexible hoses that simply push on to a pools water inlets and outlets, you then just tighten the supplied clamps to hold the hoses in place and screw the other end of the hose to the sand filter.

Extra Hose Tails can be supplied (see below) at further cost if you need to contact this pumps hoses to the larger 1.5 inch diameter piping systems that some other garden pool set ups use for example.

Sand Filter Set Includes - 1000 US Gallon Sand Filtration Pump, 2 Flexible 2m x 1.25 inch fixing hoses with 1.25 inch screw fixings to one end of the hose, 1 Flexible short hose with screw fittings each end, 6 valve flange control and setup DVD. 25kg Silica Sand media available at extra cost by selcting option from teh size drop down menu above.

Any Questions Tel 0845 680 0854 or E mail sales@funfantastic.com