AquaBlue Pure Salt Chlorinator for in-ground swimming pools upto 60,000 Ltrs in volume.
.
Pool owners can now enjoy their salt sanitised pools without spending time and energy cleaning cells.
.
AquaBlue Pure Salt Chlorinators Improve water quality
-
Kinder to skin and eyes
-
No chlorine odour
-
Efficient and reliable
-
Ongoing process recycles the salt
-
Converts low levels of salt into chlorine
-
Chlorine reverts back to salt after disinfecting the water
Unit Features ;
-
Adjustable chlorine production
-
Low level salinity indicator
-
Safety flow switch Chlorine Boost button
-
Advanced self cleaning cells
AquaBlue is an automatic Natural Chlorine Generator for pool sanitation.
Pool owners can enjoy a system combining the AquaBlue salt water chlorinator along with a microprocessor based chemical automation system that continuously measures chlorine and pH levels, and adjusts both to ensure perfect water chemistry.
The system uses a very low concentration of salt, and converts it into chlorine that treats algae and bacteria in your pool. After treating the algae and bacteria, the chlorine reverts back into sodium chloride. This process of purification continues, with no need to add extra sanitizing chemicals, and is safer than adding chemicals.
Simple to operate with preset standard defaults, reliable, and easy to install. Hands free chemical testing and balancing – no need to touch chlorine or acid.
The AquaBlue Chlorine Generator maintains the pool water at a constant healthy level of free chlorine without drastic fluctuations in the chemical levels and chloramines that cause strong chlorine odors, irritated eyes, itchy skin, and faded swimsuits.
NB. You will still need to ensure that your pool water is balanced in the normal way which will prevent corrosion and scaling.
The system comes in three parts, the Control Box, the Cell and the Flow Sensor. Installing them in the most sheltered position will protect them from extreme weather conditions.
The Cell must be installed after the filter and any heating device you have fitted, always position the flow sensor (with the arrow pointing in the flow of direction ) before the Cell. Please see diagram below for further information.
.jpg)
Please kindly Note !
Before fitting this system, you must refer first to your pool and equipment operation manuals to see if Salt Generation will cause any problems to its/their operation, i.e that your filtration, heating and fittings will not be harmed by using salt chlorination, you may find it neccassary to upgrade some of your pool components.
