Cut down on water treatment costs
Suitable for Spa & Spa Pools
Easy operation & maintenance
Installs in around 5 minutes
No red eye or dry skin
Soft silky water feel
No tools required
Chlorine cell attaches to inside of pool by self adhesive patch
Proven technology !
Salt water sanitizers have been used worldwide for many years. More spas than ever are now using AquaBlue Salt Chlorination Systems, over 90% of all pools in Australia currently use salt technology.
How it works !
AquaBlue Light is a natural chlorine generator for spa and spa pools.
This innovative system converts low concentrations of ordinary table salt (through electrolysis cell) to natural chlorine, this in turn kills algae and bacteria in your spa, whilst at the same time creating an outstanding water quality in your spa. After treating the algae and bacteria, the chlorine generated reverts back into sodium chloride. This process of purification continues, with no need to add extra sanitizing chemicals.
Outstanding water quality !
When you bathe in a spa fitted with an Aquablue Light Salt Water Purifier you will feel the difference immediately. Your spa water will feel silky soft. No more dry skin and red eyes or faded swim costumes to deal with. Kids, in particular, will appreciate the luxurious feel of your spas water.
Easy to use ! Step 1
AquaBlue Light is extremely easy to set up and use, with plug and play installation possible within under five minutes, there is no awkward, time consuming installation of the system or the need to use any tools. The UV resistant thermoplastic self-cleaning cell is placed over the side of your spa where it simply attaches to your spas inside wall using a self adhesive patch.
Next you distribute the determined amount of salt evenly around your spa and allow half an hour to an hour for it to dissolve into your spas water. Switch the system on, AquaBlue Light will purify spa water continuously until you turn the system off. Once the salt has dissolved in to your spa water you will be able to use your Salt Test Strips to take salt level readings which will help you determine your desired salt levels accordingly.
Please kindly note,
Before using this system, you must refer first to your spa and equipment operation manuals to see if Salt Generation will cause any problems to its/their operation, i.e that your filtration, heating and fittings will not be harmed by using salt chlorination, you may find it neccassary to upgrade some of your spa components.