-
Cut down on water treatment costs
-
Suitable for larger Above Ground & smaller In-ground Pools
-
Self-cleaning cell
-
Easy operation & maintenance
-
Installs in around 5 minutes
-
No red eye or dry skin
-
Soft silky water feel
-
No tools required
-
Chlorine cell attaches to inside of pool by self adhesive patch
Proven technology !
Salt water sanitizers have been used worldwide for many years. More pools than ever are now using AquaBlue Salt Chlorination Systems, over 90% of all pools in Australia currently use salt technology.
How it works !
AquaBlue Light is a natural chlorine generator for larger Above Ground Pools and smaller In-ground swimming pools which hold upto 30,000 litres (30 cubic metres) of water. This innovative system converts low concentrations of ordinary table salt (through electrolysis cell) to natural chlorine, this in turn kills algae and bacteria in your pool, whilst at the same time creating an outstanding water quality in your pool. After treating the algae and bacteria, the chlorine generated reverts back into sodium chloride. This process of purification continues, with no need to add extra sanitizing chemicals.
Outstanding water quality !
When you swim in a pool fitted with an Aquablue Light Salt Water Purifier you will feel the difference immediately. Your pool water will feel silky soft. No more dry skin and red eyes or faded swim costumes to deal with. Kids, in particular, will appreciate the luxurious feel of your pool water.
Easy to use Step 1
AquaBlue Light is extremely easy to set up and use, with plug and play installation possible within under five minutes, there is no awkward time consuming installation of the system or the need to use any tools. The UV resistant thermoplastic self-cleaning cell is placed over the side of your pool where it simply attaches to your pools wall using a self adhesive patch.
Next you distribute the determined amount of household salt (for your size pool) evenly around your pool and allow an hour or so for it to dissolve into your pools water. Switch the system on, AquaBlue Light will purify pool water continuously until you turn the system off. Once the salt has dissolved in to your pool water you will be able to use your Salt Test Strips to take salt level readings which will help you determine your desired salt levels accordingly.
Please kindly Note !
You must ensure first with your pool and equipment operation manuals that Salt Generation will not cause any problems to its operation, i.e that your filtration, heating and fittings will not be harmed by using salt chlorination.
