6.5m x 3.6m Sol+ Guard 500 Pool Solar Cover Wooden Pool

Sol+ Guard 500 micron Solar Cover 140UV for Plastica Wooden Swimming Pool
Sol+ Guard 500 micron Solar Cover 140UV for Plastica Wooden Swimming Pool Sol+ Guard 500 micron Solar Cover 140UV for Plastica Wooden Swimming Pool
Our Price: £195.00
 

  • Density: 500 micron
  • Eliminate water evaperation by 98%+
  • Cut chemical consumption by 30% 
  • Increase pool temp by up to 8 o/c
  • Reduce Energy Consumption by over 50%
  • Clear top with Aqua underside
  • Supplied to be trimmed on site
  • New Geo Bubble Material
  • 6 year UK & Eire pro-rata warranty
  • Please note pictures show optional hemming and leading edge
  • Please allow around 5 to 7 working days for production 
What is a Sol+Guard cover ?
.
A Sol+Guard Solar Pool Cover is an innovative product manufactured by Plastica using swimming pool bubble cover material produced by their sister company, Plastipack Limited.
.
The product has a unique two ply combination, a clear top surface and a translucent tinted underside. Tests carried out, in collaboration with Brighton and London Metropolitan Universities, prove that the more translucent a bubble cover is, the greater the penetration of solar energy into the pool water. This cover is at the top of its class in allowing the maximum amount of solar gain.
.
The Sol+Guard cover has the ability to provide a variety of benefits to the end-user. This ranges from reducing the heating and maintenance costs and the personal desire to save natural resources, to the practicalities of reducing energy and water usage.
.
Increase pool temperature by up to 8°C through solar energy gain
The unique two ply combination of a Sol+Guard cover allows maximum solar gain to pass through the cover increasing the pool temperature by up to 8o/c
.
.
Eliminate Water Evaporation by 98% +
With an Sol+Guard pool cover you will be able to eliminate water evaporation by over 98%, thus greatly reducing your water consumption and your water charges, as well as saving a vital natural resource. 
Plastipack carried out research, in collaboration with the Brighton University and London Metropolitan University, which proved that the evaporation loss in the UK for an average sized pool, 4m x 8m, is approximately 32,000 litres per year. This figure is considerably higher for hotter climates. 
.
Reduce Chemical Consumption by up to 30%
.
A Sol+Guard cover can help reduce chemical losses by evaporation by up to 30% when it is in use. All pool chemical levels and treatment should be maintained at the manufacturers recommended level. 
.
Reduce Energy Consumption by over 50%
.
A Sol+Guard cover will eliminate evaporation and greatly reduce radiation. Plastipack’s heat retention tests carried out in collaboration with the Brighton and London Metropolitan Universities, showed conclusive energy savings of over 50%. This applied to oil, gas, electric heater or heat pump usage. Where solar heating is used, it is possible to invest in up to half the amount of panels normally required for a pool without a cover.
.


Reduce Debris Contamination
.
Debris such a leaves, dirt, insects and bird droppings are not only unsightly in a pool but also provide nutrients for algae and bacteria to feed on. When the pool is covered these contaminants will be kept out of the water, greatly improving the quality and appearance of the water.
.
Save Money
.
A Sol+Guard cover will save money by reducing water, energy, cleaning and chemical costs. The Sol+Guard pool cover will pay for itself in less than a year.
.
Warranty
.
The Sol+Guard cover has a 6 year pro rata warranty. The Sol+Guard™ and EnergyGuard™ materials are supplied in two UV formulations that are covered by our pro rata 6 year warranty. 
.
Benefits
.
By reducing the amount of energy needed to heat and filter your pool water, a Sol+Guard cover will greatly reduce your CO2 footprint. It also conserves water and, at the end of its life, a Plastipack cover is 100% recyclable.
.
Any Questions please E mail sales@funfantastic.com